Eastlake Layover Facility
Helping our buses stay on time
Layover facilities provide our bus operators a safe location to take required rest breaks and start their next trip on time. Buses are now using a layover along Eastlake Ave E!
What's happening now
Construction for the Eastlake Layover Facility project is complete. King County Metro operators are utilizing these layover spaces along the east side of Eastlake Ave E, to park buses and take breaks before starting their next trip. To learn more about our bus layover facility check out our FAQ section.
- Fall 2022: Contractor starts setting up for construction and community is informed about construction impacts, how to prepare and reach out to the team with questions.
- Spring 2023 to Fall 2024: Construction work starts to repave roadway and sidewalks, perform electrical work, install new Protected Bike Lane (PBL), and structure of building goes up.
- Fall 2024: Facility opens for bus service and final finishing touches include landscaping, painting and road marking.
- Winter 2025: Project complete
With the completion of the construction comes several roadway changes for drivers, pedestrians and cyclists once the project is complete.
- There are impacts to some on-street parking stalls on the west side of Eastlake Avenue East. Parking has been:
- removed between Roy and Mercer streets
- reduced to 6 stalls between Mercer and Republican streets
- removed between Harrison and Thomas streets
- restricted to weekend-only between Thomas and John streets
- A shared-use path on the east side of Eastlake Avenue East between Roy and Mercer streets.
- Replacement of the northbound right-turn slip lane to Lakeview Boulevard East with a right-turn-only lane at Roy Street.
- New and improved pedestrian crossings.
- New traffic signal installation at the Eastlake Avenue East and Republican Street intersection.
- Removal of the existing bus stop at Mercer Street and Eastlake Avenue East. An alternative stop will be Route 70 at Mercer Street and Fairview Avenue. Please review Route 70's schedule for more information.
- Eastlake Layover Facility Construction complete – February 2025
- Eastlake Ave E striping notice – May 2024
- Eastlake Ave E grinding and paving notice – March 2024
- Republican St underground utility work notice – March 2024
- Eastlake Ave E weekend and night notices – January 2024
- Lakeview Boulevard northbound lane notice – November 2023
- Lakeview Boulevard southbound lane notice – October 2023
- Lakeview Boulevard detour notice – September 2023
- Eastlake Ave E traffic switch notice – April 2023
- Eastlake Ave E on-street parking notice – January 2023
- Construction information fact sheet - Fall 2022
- Final Design Outreach Report - March 2021
- Project folio - March 2021
- Project fact sheet - January 2020
- Eastlake Layover Facility Phase 1 Public Engagement Report - March 2018
- Screen shots of our online open house - January 2018
- Seattle Department of Construction and Inspections info sheet: Center City Layover Project
Community engagement
We conducted public outreach between 2017 and 2019 to get feedback on the design of the facility. From input received through stakeholder meetings, door-to-door outreach and an online open house with survey, several key themes emerged.
People told us they preferred bright, colorful concrete and structures that stand out rather than blend in. They also preferred vegetation and natural, plant-based screening over physical barriers or walls that are textured or painted. This feedback informed the design you see today.
In general, for any future layover projects, people told us it’s important that Metro design facilities that are safe and secure, as well as pedestrian- and bike-friendly. Off-street layover facilities should provide comfort for bus operators, fit in with their surrounding neighborhoods, and minimize noise and environmental pollution and congestion. People cited landscaping, lighting, and screening as the most important features for future off-street layover facilities.
Environmental review process
Metro completed environmental review under the State Environmental Policy Act (SEPA) for the Eastlake Layover Facility. After completing a SEPA checklist, a Determination of Non-Significance (DNS) was issued on Dec 14, 2018. The DNS was published in the Seattle Times and mailed to property owners within 500 feet of the proposed facility. The 14-day public comment period ended at 5 pm on Dec 28, 2018.
FAQ
A layover facility is a space where King County Metro bus operators can take their mandated rest breaks to help them stay alert. When complete, the Eastlake Layover Facility will accommodate 11 bus layover spaces (six off-street and five on-street) and provide a space for bus operators to take breaks and access safe restroom facilities. This facility will not be open to the public or transit riders.
A layover facility is important because it allows buses to start their next trip on time and provides a safe place for King County Metro bus operators to take their mandated rest breaks to help keep them alert while on the road.
- Keeps buses on schedule
- Frees up street space for other uses
- Moves “out of service” buses off-street instead of taking valuable curb space
- Provides safe and reliable restrooms and break areas for bus operators
Once the construction of the layover facility is completed, there will be roadway changes to Eastlake Ave East. Some of these changes include:
- Shared-use path on the east side of Eastlake Ave East between Roy Street and Mercer Street
- New or improved pedestrian crossings
- New traffic signal at Eastlake Ave E and Republican Street
- Permanent lane reductions from four to two lanes between Roy and Stewart Streets
- Reduced and restricted parking in some areas
- Removal of a bus stop at Mercer Street and Eastlake Ave E
- New protected bike lanes on the east and west sides of Eastlake Ave E between Fairview Ave and Stewart Street
Improvements for pedestrians and cyclists will include a shared-use path on the east side of Eastlake Ave E between Roy St and Mercer St and new protected bike lanes on the east and west sides of Eastlake Ave E between Fairview Ave N and Stewart St.
Metro is working in partnership with the Seattle Department of Transportation’s Eastlake Layover Facility Mobility Improvements Project to construct protected bike lanes. SDOT will install new protected bike lanes on the east and west side of Eastlake Ave E between Fairview Ave N to Roy Street.
Please contact Darrell Bulmer with the Seattle Department of Transportation via email at darrell.bulmer@seattle.gov or by phone at 206-375-5636 for more information.
Parking will be reduced or restricted on some sections of Eastlake Ave E.
On-street parking stalls on the west side of the roadway will be:
- removed between Roy and Mercer streets
- reduced to six stalls between Mercer and Republican streets
- removed between Harrison and Thomas streets
- restricted to weekend-only between Thomas and John streets
Yes, load zones will also be affected but reinstated after construction is complete. Feel free to contact us if you have questions.